Electric Shock Catcher
Mar 18, 2025
A sharp weapon for snatching knives, the crescent ring is made of metal wolf tooth shape, which has the ability to attack and can also protect against knife cuts.
Two electric shock points release electric shocks on both sides of the crescent ring.
Parameters：
|
Normal size (L*W) |
1287mm X 200mm |
|
Normal working size (L*W) |
1287mm X 371.80mm |
|
Extended working size (L*W) |
2031mm X 371.80mm |
|
Weight |
≤2.85kg |
|
Input |
DC5V/2A |
|
High voltage output (V) |
30,000 (V) X2 |
|
Flashlight rated power |
3W |
|
Battery capacity |
4000mAh |
|
Catcher material |
aviation aluminum |
|
Diameter of the hand-held grip |
33±1mm |
|
Crescent ring opening diameter |
371±10mm |
|
Crescent ring closing diameter |
200±5mm |
|
Minimum working length |
1287±10mm |
|
Maximum working length |
2031±10mm |
|
Crescent closing force |
≤50N |
|
Extension rod pull-out force at minimum working length |
600N |
|
Extension rod pull-out force at maximum working length |
1000N |
|
Extension rod retraction force at maximum working length |
600N |
|
Bending force at the midpoint of the length direction at maximum working length |
600N |
How to use:
1. Hold the grabber (hold the handle of the grabber head with your right hand and the long rod of the grabber with your left hand), press the crescent ring switch, and pull it back to the top.
2. Push the open grabber to the disposal target. The crescent ring will automatically close after the linkage slider of the grabber is stressed, and the disposal target can be controlled. Push back with your hands and pull forward with your feet.
3. When the disposal target is controlled, press the crescent ring switch to turn on the movable crescent ring, then press the dot and push forward to the top, and press the linkage slider down to close the crescent ring.
